Portable, Durable and quick to erect

The Felix Design Portable Choir Riser has been developed using our 30 years of manufacturing experience. This unique design separates it from any other choir riser we know, looking permanent but that is fully demountable.

Felix Choir Risers were originally designed to facilitate raising choir members in tiered rows, either in straight lines or with a curved effect. Felix Portable Choir Risers use the same rostra units, just positioned in different configurations. No further attachments or fixings are required. Individual module components are relatively small for ease of transporting by car. All the items can be carried by choir members for quick and easy assembly at the concert venue. To keep the storage area to a minimum, all the subframe panels can be flat packed within the platform top. This then creates a single unit that is only 60mm in thickness.

• Quick and easy assembly using the Felix Toplok system
• Create different configurations using the same modules
• Fully carpeted with a choice of colours
• Lightweight and durable
• Packs flat so minimum storage required
• Easily transported in own vehicles
• Safety rails option available
• Designed for both standing and seated choirs
• Handmade to order

Felix Portable Choir Risers are built to the same high standards as our current range of staging which has been FIRA tested and approved. We use the same quality materials as our main staging systems. Hand built to order in our factory based in Tiverton, Devon. We can also build bespoke designs for that extra personal finish.

Both configurations on the right are achieved with no extra equipment. The step heights measure as follows – Back 570mm, Middle 380mm and Front 190mm on both versions. In addition extra centre pieces can be purchased to make standing area bigger. The total length for the risers illustrated is 4.8m at the rear edge and should take 9 or 10 singers. The middle level should raise 8 or 9 persons and the lower 7 to 8, giving a total of 27 choir members raised. For the larger choir, additional 1.2m long oblong modules can be positioned in the middle between the tapered units, or at the end of each row. As a guide, 5 singers usually take a space of 2.4m. For transporting the risers, the heaviest component is the rear tread top which is just 8.5kg. The entire Choir Riser shown fits into a 3 door ‘Yaris’.

Choose your colour of carpet from our large selection as available from our extensive stock. Other configurations can be achieved when purchasing extra tops and subframes.  Many other layouts can be achieved by purchasing extensions or joining two packages together, please call us to discuss your personal requirements.

The Portable Choir Riser is available in a standard range sizes, however we can also make bespoke sizes and shaped tops and you can find details of this by clicking HERE

Felix Portable Choir Risers are fully carpeted and adjacent modules are linked using the Felix Toplok system. To assist in building the complete structure, each rostra block incorporates a simple Toplok device. Felix Portable Choir Risers can be used for all choirs performing in a standing position. The depth of each step is 600mm with a rise of 190mm between levels. Normally three rows of singers are raised with a fourth row on the floor in front. However, any number of rows, size variations, etc can be provided as required by the individual choir. For concerts where the choir is required to sit and stand, a 900mm deep version is available. Safety rails are available as an optional extra for the back row and sides if required.


Sep 21, 2015 | Posted by | Comments Off on Standing